Peaty's Tubeless Valves

Black, 40mm, One Pair

Varenr:118735-40
229,-
-+
Lager nettbutikk:
5+ på lager
  • 5+Boardshop Lade
  • 0Boardshop.no
BeskrivelseSupport
Beskrivelse
Peaty's Tubeless Valves

Made from lightweight anodised aluminium, Peaty’s tubeless valves are a universal 40mm length and fit most tubeless rims including carbon, Enduro and DH rims.

The large soft rubber base easily creates an airtight seal on valve holes up to 8mm diameter. The integrated valve core remover caps make removing the valve and topping up with sealant a breeze when in the workshop or on the trails.

Valves for Life!
If you manage to break, snap, bend or crack our valves* then we'll fix or replace them free of charge!

Fitting Instructions:
    Remove valve cap, o-ring and lock nut
    Insert valve through valve hole in rim
    Push the o-ring onto valve stem
    Thread the lock nut onto valve stem
    Hand tighten lock nut until firm
    Screw on valve cap to remove the valve core

Valve Core Removal
To de-core the valve, all you need to do is:
    Unscrew the valve cap
    Slot the valve cap over the valve core
    Twist anticlockwise until the core can be pulled out
    Repeat in reverse to refit

*Really? For Life?!
Ok so there's a few conditions. Valves are warranted for life to the original owner only. Valves will not be warranted in the following situations:
    If they have snapped or threaded from being over-tightened
    If they have clogged with sealant
    If they have been intentionally broken
    If parts have been lost
Support
Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.